Recommended News
contact us
Tel: +86-21-56031255
Mobile: +86-18930968947
E-mail:fcj@muhong.cn
muhongjidian@vip.163.com
wechat: +86-18930968947
whatsapp: +86-18930968947
skype: muhongjoseph
used ERW tube mill
No. 193 New edge milling machine
It is new machine. The written time is August 04,2021.- product description
- Technical Parameters
Processing mode: metal cutting
Specification range of processed steel plate
Steel plate width: 1200-4500mm
Steel plate length: 6000-12000mm
Steel plate thickness: 8-40
Steel plate material: X70
Working principle of the equipment: the working process of the machine is that under the action of other equipment and the roller table of the edge milling machine, the steel plate is sent to the edge of the milling unit, and the steel plate is centered according to the symmetrical center of the milling unit through the centering mechanism. One end of the steel plate enters the upper and lower clamping roller table to clamp the steel plate, the steel plate is fixed, the steel plate is clamped by the upper and lower clamping roller table, and the roller table rotates and pulls the steel plate to run,The steel plate is transported along the length direction. In the process of steel plate transportation, the milling unit performs forming milling on the two long edges of the steel plate edge respectively.
If you want to quote or further information on this product, please fill out the form below.
-
No.198 New OD 377 tubemill
-
No. 199 114 high frequency welded pipe mill unit
-
ET No.142 Used 325 ERW tube mill
-
ET No.111 Used OTO mills Solid state HF Welder Stainless steel tube mill
-
Φ165-Φ235mm ERW tubemill
-
used 250x250x12mm square direct forming ERW tubemill
-
used DFT 400x400mm ERW tubemill
-
ET No.94 Used stainless steel ERW tube mill
-
Used hydro tester
-
2006 used OD355mm ERW tubemill (NAKATA)
-
No.189 12 in used ERW API Tubemill
-
No.177 Used tube mill OD 325mm (12 in)
-
2019 Φ245×8mm ERW tubemill
-
No.194 500x500mm Direct square welder unit
-
Used end facing machine
-
2007 Chinese Brand 400x400mm square tube direct forming tubemill
-
2002-2003 OD219-508×16mm ERW tubemill API
-
new ERW tube mill
-
used 200X200X14mm DFT tubemill
-
2018 Nanyang OD12.7-50mm ERW tubemill
-
No.175 used 500x500mm direct forming tubemill
-
OD21-76mm ERW tubemill
-
OD45-105mm ERW Tubemill
-
ET No.110 Used OTO 76.1mm Stainless steel Laser welder tubemill
-
No.186 4 station tube hydro testing machine
-
CR No.61 Used 1600mm Cold Bending Roll Forming Machine
-
200×200×14mm direct forming tubemill
-
new ERW tube mill
-
ET No.159 Used 325mm Stainless steel ERW Tube mill
-
ERWΦ219 tubemill
-
2007 used 5-12.5×300×300mm DFT
-
No.197 New MH50 high frequency welded pipe mill unit
-
No.179 Used tube mill OD 165mm
-
used (4-12.7)xOD273mm ERW tubemill
-
ET No.171 Used ERW tubemill
-
No.195 auto strapping machine for steel tube and steel pipe or steel coil
-
new ERW tube mill
-
No. 196 6 station tube hydro testing machine
-
used 30×30mm~80×80mm ERW tubemill
-
2016 used OD219×(3-8)mm ERW tubemill
-
used 40×40mm~100×100mm ERW tubemill
-
No.176 WG377 tube mill
-
used OD235-OD400 ERW Tubemill
-
Used straightening machine