No.93 Used 273 HF Tube mill

used ERW tube mill

Your current location：首页 > Products > used ERW tube mill > HFT No.93 Used 273 HF Tube mill

HFT No.93 Used 273 HF Tube mill

Used 273 HF Tube mill,it is made in 2009 and shut down in 2012.It is online now.The machine weight is approximate 380tons.The written time is June 9,2020.

product description
Technical Parameters

Material: Mild steel

Thickness:3-12.7mm

Tube OD:114-273mm

Tube length:Max 12m

Mill speed:20m/min

Coil ID: 580-760mm

Coil OD: 1300-2200mm

Coil weight: Max 30t

Coil width:350-1100mm

Feeding direction: Left feeding

Uncoiler motor power:7.5KW

Straight head motor power:4KW

Leveler main motor power:30KW

Leveling adjustment motor power: 5.5+1.1KW

Shearing and butt welder motor power:31.9KW*2

Spiral accumulator pinching motor power: 90KW

Spiral accumulator grail motor power:45KW*2

Forming speed:10-40m/min

Forming and sizing main motor power:355KW*2

Forming horizontal roll frame 7 sets

Horizontal roll shaft: diameter 190mm

Horizontal roll shaft material: 42CrMo

Vertical roll shaft diameter:100mm

Extrusion side roll shaft diameter:160mm

Forming vertical roll frame 10 sets

Sizing horizontal roll frame: 4 sets

Sizing vertical roll frame: 4 sets

Working table board thickness: 45mm

Scope of supply:

Uncoiler

Uncoiler car

Straight head machine

Leveler

Shear and butt welder

Horizontal spiral accumulator

800KW HF Welder

Forming and size-fixed machine

Flying saw

Run-out roller

Hydraulic station

Rollers

End-facing machine

1 set of 219mm tooling

If you want to quote or further information on this product, please fill out the form below.

product name
Your Name
phone number
E-mai *
Message content *
Security Code *

Previous:ET No.94 Used stainless steel ERW tube mill

Next:ET No.79 Used 400 Square Pipe Forming Machine