Used bar mill:

 Basic technical parameters:

1.     Billet: 150x150mm continuous casting billet material?Q235, Q195

2.     Finished product: φ 12 - φ 28 deformed steel bar

3.     The designed annual production capacity is 350000 tons

 Equipment introduction

         1.roughing

H1 φ 560x850 composite reducer I = 68.9

DC motor 450KW 325 / 650rpm

H2 φ 560x850 composite reducer I = 54

DC motor 450KW 325 / 650rpm

H3 φ 520x850 composite reducer I = 50.8

DC motor 550KW 500 / 1200rpm

H4 φ 520x850 composite reducer I = 38.9

DC motor 550KW 500 / 1200rpm

H5 φ 520x850 composite reducer I = 34.47

DC motor 550KW 500 / 1200rpm

H6 φ 500x850 composite reducer I = 25.02

DC motor 550KW 500 / 1200rpm

H7 φ 500x850 composite reducer I = 17.88

DC motor 550KW 500 / 1200rpm

J1 flying shear (5000mm 2) zfqz 280KW

           2.Medium rolling mill

H8 φ 450x700 composite reducer I = 14.35

DC motor 600kW 500 / 1200rpm

H9 φ 450x700 composite reducer I = 10.5

DC motor 600kW 500 / 1200rpm

H10 φ 400x700 composite reducer I = 7.36

DC motor 600kW 500 / 1200rpm

H11 φ 400x700 composite reducer I = 5.12

DC motor 600kW 500 / 1200rpm

H12 φ 400x700 composite reducer I = 4

500 kW / 650kw DC motor

H13 φ 400x700 composite reducer I = 3.2

DC motor 650kw 500 / 1100rpm

J2 cutting head and tail flying shear (1000mm2) zfqz 315KW

         3.finish rolling

H14 φ 350x650 composite reducer I = 3

DC motor 650kw 500 / 1100rpm

V15 φ 350x650 composite reducer I = 2.2

DC motor 650kw 500 / 1100rpm

H16 φ 350x650 composite reducer I = 2.06

DC motor 850-1000kw 500 / 1200rpm

H17 φ 350x650 composite reducer I = 1.56

DC motor 850-1000kw 500 / 1200rpm

H18 φ 350x650 composite reducer I = 1.4

DC motor 850-1000kw 500 / 1200rpm

H19 φ 350x650 composite reducer I = 1.25

DC motor 850-1000kw 500 / 1200rpm

  4.     Finished product collection

There are 4 pinch rolls for J3 and J4 flying shears.

4Walking cooling bed 78mx8.5m, 500t fixed length cold shear

The collecting platform is 12mx8m and 2 balers

Rough rolling part :

1. Φ 550 one drag three flat bars; 3 DC 1250kw

2.450 one holding three flat bars; 4 sets (2 groups) DC 1000kwx2

3.1#curved flat shear; DC 280KW 

Medium rolling part: 

4. Φ 365 one driven one; four flat and four vertical; 8 sets, 1 DC 650kwx8

5.2#crushing shear 1 set dc.280kw 

Finishing rolling part: 

6. Hafei 45 ° torsion free 230. One group of one tractor. DC 1500kwx2

7. One set of water piercing device 

8.3#spare ruler shear. 

9. Two pinch rolls

Cooling beds parts: 

10. 90 × 12m1 sets of single line rotating grain cooling bed 

11. Collection and packing of 1 set. 

Note: the above high bar is equipped with online equipment and complete set,

Old rolling line: 

High bar 15 continuous rolling full DC, 550 one drive three with three units, 450 one drive two with four units, 

365 four flat and four vertical.

The annual output is 400000 tons.