2010 860×1600mm hot rolling mill aluminum hydraulic AGC

used hot rolling mill

Your current location：首页 > Products > used hot rolling mill > 2010 860×1600mm hot rolling mill aluminum hydraulic AGC

stock No.: 468, it is written on January 19, 2023

product description
Technical Parameters

machine is made in 2010

material: Series 1000, series 3000, series 5000

input ingot thickness: 500mm (series 1000, series 3000), 300mm(series 5000)

input ingot width: 1360(series 1000, series 3000), 1260mm (series 5000)

input ingot length: 5000mm

input ingot weight: max. 9000kg

output thickness: 4-7mm

output coil width: 1060-1360mm

coil ID: 610mm

coil OD: 1850mm(max.)

coil wieight: max. 9000kg

hot rolling mill

work roll size: OD860*1600mm

rolling force: 13000KN

line speed: max.150m/min

open size: max. 520mm

electric pressing down motor: 220V *2

main motor drive

main motor: DC 660V

hydraulic thickness adjustment AGC

hydraulic oil tank OD: 760/600mm

centre device 2 sets

height: 380mm

length: 4000mm

open size: 800-1400mm

currency: ±2mm

speed: 200mm/s

pinch roll 2 sets

pinch roll motor: AC 30KW

pinch roll OD: 300mm

length: 1600mm

speed: max.150m/min

recoiler (left)

recoiler motor: 242KW*2 (left), 242kw*2(right)

speed: max.180m/min

recoiler shaft diameter: 610mm

recoiler (right)

recoiler motor: 242kw*2

speed: max.180m/min

recoiler shaft diameter: 610mm

auxiliary recoiling device 2sets

coil car (2 sets)

walking speed: 3m/min

lifting distance: 1000mm

hydraulic shear 2 pcs

hydraulic shear motor: 37kw*1, 55kw*2, 4kw*1

max. shearing thickness: 100mm

max. shearing width: 1360mm

shear mode: down shear

entrance roller table

roller table in frame: active, Concave-convex roll, AC drive 15KW

work roller table: double cones, AC drive 30kw

conveyor roller table: double cones, AC Segmented drive

exit roller table

roller table in frame: active, Concave-convex roll, AC drive 15KW

work roller table: double cones, AC drive 30kw

conveyor roller table: double cones, AC drive

Emulsion cooling system

current: 500L/min

pressure: 0.5--.6Mpa

Clean liquid tank capacity: 80m3

Dirty liquid tank capacity: 80m3

heating device: Gas boiler, control temperature 50-60 ℃, power: 20kw

feeding bump: GE/GEC125X100-250, current 300³/h, lift 70m, 3pcs (2 for work, 1 for spare)

power 90kw, 2900r/min

filter bump: KQL250/300-55-4 current 365³/h lift 31.5m, power 55kw

hydraulic system

Thin oil centralized lubrication system

Dry oil centralized lubrication system

Pneumatic system

electric control system

operation console

If you want to quote or further information on this product, please fill out the form below.

product name
Your Name
phone number
E-mai *
Message content *
Security Code *

Previous:1998 2hi 1250mm hot rolling mill aluminum plate

Next:used 1720mm roll caster